ONKYO M-282 2-Channel Power Amplifier
ONKYO M-282 2-Channel Power Amplifier
Product Description
Amazon.com Product Description
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)
If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.
You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.
The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.
Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.
What's in the Box
Power amplifier, an AC power cord, and a user's manual.
Product Description:
You may be answering the siren call to assemble a separates system for audio or home theater
You may be contemplating an awesome home computer audio section
You may require power for the extra two channels in a 7.1 surround receiver or processor
Whatever the case, the obvious choice is the Onkyo M-282 Power Amplifier
100 watts x 2 channels of 10Hz>100kHz full-bandwidth power will be more than up to the stiffest audio challenge
Onkyo's proprietary Wide Range Amplifier Technology (WRAT) maximizes signal accuracy and resolution
A back-panel automatic power-on/off switch lets you set the amp to turn on when it senses an incoming audio signal, or when you power a component connected to the 12-volt trigger input
Back panel also offers an input level control knob, and banana-plug compatible speaker terminals
Preamp-level input/output loop lets you daisy-chain multiple M-282s, and play the same source in several rooms
Dimensions: 5-3/4"H x 17-1/8"W x 13-1/16D
Warranty: 2 Years
ONKYO M-282 2-Channel Power Amplifier
Average customer rating:
|
Onkyo M-282 2-Channel Power Amplifier
Manufacturer: ONKYO ProductGroup: CE Binding: Electronics Similar Items:
Accessories:
Product Features:
ASIN: B000069E2V |
Product Description
100 watts x 2 channels into 8 ohms / Input level adjustment / Preamp-level input-output loop / Auto power on-off / Pass-through Onkyo's proprietary Wide Range Amplifier Technology (WRAT) maximizes signal accuracy and resolution A back-panel automatic power-on/off switch lets you set the amp to turn on when it senses an incoming audio signal, or when you power a component connected to the 12-volt trigger input Back panel also offers an input level control knob, and banana-plug compatible speaker terminals Preamp-level input/output loop lets you daisy-chain multiple M-282s, and play the same source in several rooms Dimensions - 5-3/4H x 17-1/8W x 13-1/16D Warranty - 2 YearsAmazon.com Product Description
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.
You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.
The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.
Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.
What's in the Box
Power amplifier, an AC power cord, and a user's manual.
Customer Reviews:
AMPed system.......2006-08-04
Onkyo.......2006-02-01
Good, But I am glad I did not buy anything cheaper.......2006-01-20
Great quality amp.......2003-04-05
Average customer rating: |
ONKYO M-282 2-Channel Power Amplifier REFURBISHED
Manufacturer: ONKYO ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0002V617S |
Product Description
Ideal for THX Surround EX and multiroom/multichannel systems, the M-282 has got to be the best upgrade value in the home-theater world. Everything you need in an additional amp is here, including Onkyo's WRAT to maximize signal accuracy.Electronics:
Recommended Consumer Electronics:
ACOUSTIC RESEARCH Home Theater 2-Way Bookshelf Loudspeaker A
T1/E1 24 Port Pots Iad Atm/mgcp/sip N.a.
Ink Cartridge for Stylus Pro 7500 Printer, Light Cyan
17in LCD 26mm 1280x1024 81hz 171b Silver Front/black Back
USB Data Cable for Samsung E105
Asus Computer 802.11B 2.4GHZ TO 11MBPS-USB ADAPT W/HIGH GAIN ANT ( WL-140 )
Philips 55PP9363H 55'' Epic Series Widescreen HD-Ready TV