AudioSource Amp 100 2-Channel Power Amplifier

AudioSource Amp 100 2-Channel Power Amplifier

AudioSource Amp 100 2-Channel Power Amplifier

Product Description
Amazon.com Product Description
A favorite of audiophiles everywhere, the AudioSource Amp 100 two-channel power amplifier is built to deliver powerful music, pure and simple, with few extra controls to get in the way. Listeners can use the Amp 100 as an independent stereo amp (50 watts x 2 into 8 ohms) when used with a preamp, as a second zone amplifier in multi-room applications, or as a rear-channel amplifier in a 6.1- and 7.1-channel system. Combine the Amp 100 with an additional monoblock amp (the Amp 100 delivers 150 watts RMS of bridged power) and a preamp and listeners can independently drive two front left/right speakers or two rear speakers, further clarifying each channel to create dynamic, high-end sound. To connect additional components to the amp, use the included stereo inputs with automatic priority override (for connecting to a source such as a receiver, CD player, or preamplifier) or the auxiliary output for creating a multi-amp setup.

The amp boasts a precise frequency response of 20 Hz to 20 kHz and total harmonic distortion of 0.02 percent. Additional features include A, B, or A+B speaker selector switches, front-panel mounted volume and balance knobs, and five-way binding posts that work with both bare wire and banana plugs. Plus, at 16.5 by 2.9 by 9.25 inches (W x H x D), the device should fit comfortably in most rack mount or home entertainment setups. All AudioSource amps are backed by a two-year warranty on parts and labor.

What's in the Box
Amp 100 amplifier, user's manual.

Product Description:
AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25

AudioSource Amp 100 2-Channel Power Amplifier
AudioSource Amp 100 2-Channel Power Amplifier
Average customer rating: 4.5 out of 5 stars
  • Good Deal
  • Good little amp
  • Great little amp for the price!
  • Why the auto-switch???
  • Awsome amp
AudioSource Amp 100 2-Channel Power Amplifier

Manufacturer: Audio Source
ProductGroup: CE
Binding: Electronics

Component AmplifiersComponent Amplifiers | Receivers & Amplifiers | Audio & Video | Categories | Electronics
Audio & VideoAudio & Video | Refurbished & Used | Special Features | Electronics Features | Electronics
AudioSourceAudioSource | Brands | Electronics Features | Electronics
Similar Items:
  1. Polk Audio Atrium 45 All-Weather Speaker, White Finish (Pair)
  2. BIC America DV62si Bookshelf Speakers (Pair, Black)
  3. AudioSource LS200 Four-inch Full Range Indoor/Outdoor Speakers (Pair)
  4. AudioSource Pre One/A Stereo Preamplifier

Accessories:
  1. AudioSource EQ200 10-Band Stereo Graphic Equalizer
  2. AudioSource Pre One/A Stereo Preamplifier
  3. Dayton SCP-10 Speaker Cable Pair w/Bananas 10 ft.
  4. Dayton RCA-1.5 RCA Audio Cable 1-1/2 ft.
  5. Dayton RCA-6 RCA Audio Cable 6 ft.

Product Features:
  • 2-channel 100-watt (50 watts x 2) power amplifier (provides 150 watts RMS bridged mono power)
  • Ideal for use as a second-zone amplifier or as a rear-channel amplifier in a 6.1- and 7.1-channel system
  • Pair of stereo inputs with priority override; A/B speaker selector allows multi-room amplification
  • Signal-sensing auto-on/off switching conserves power while simplifying setup
  • Measures 16.5 by 2.9 by 9.25 inches (W x H x D); 2-year warranty

ASIN: B00026BQJ6

Product Description

AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25

Amazon.com Product Description

A favorite of audiophiles everywhere, the AudioSource Amp 100 two-channel power amplifier is built to deliver powerful music, pure and simple, with few extra controls to get in the way. Listeners can use the Amp 100 as an independent stereo amp (50 watts x 2 into 8 ohms) when used with a preamp, as a second zone amplifier in multi-room applications, or as a rear-channel amplifier in a 6.1- and 7.1-channel system. Combine the Amp 100 with an additional monoblock amp (the Amp 100 delivers 150 watts RMS of bridged power) and a preamp and listeners can independently drive two front left/right speakers or two rear speakers, further clarifying each channel to create dynamic, high-end sound. To connect additional components to the amp, use the included stereo inputs with automatic priority override (for connecting to a source such as a receiver, CD player, or preamplifier) or the auxiliary output for creating a multi-amp setup.

The amp boasts a precise frequency response of 20 Hz to 20 kHz and total harmonic distortion of 0.02 percent. Additional features include A, B, or A+B speaker selector switches, front-panel mounted volume and balance knobs, and five-way binding posts that work with both bare wire and banana plugs. Plus, at 16.5 by 2.9 by 9.25 inches (W x H x D), the device should fit comfortably in most rack mount or home entertainment setups. All AudioSource amps are backed by a two-year warranty on parts and labor.

What's in the Box
Amp 100 amplifier, user's manual.

Customer Reviews:

4 out of 5 stars Good Deal.......2007-06-26

Purchased this amp to power my Boston Acoustics Grand Voyager outdoor speakers hooked up on a second zone set up. The AudioSource 100 gets the job done as long as you don't make it strain too hard. Moderate to loud sounds pretty smooth, but anything over that gets the grunge going. Then again, those speakers cost 8X more then the amp does, so lesser speakers should be even better with it. Hey, what do you want for under $100? Plain black box and easy to set up, comes with two sets of speaker inputs and an A/B switch.

Can't beat it for the price, highly recomended.

4 out of 5 stars Good little amp.......2007-06-19

If you're looking for a small amp for a second room, you found it. If you need a compliment to upgrade your 5.1 this will do well for you. For the price you can't beat it, it delivers good sound and can really expand your system. I use it as a stand alone amp to power some smaller speakers with an iPod dock connected to it. It's 50watts per channel so it's no powerhouse by any means but if you need a boost, this is your amp.

4 out of 5 stars Great little amp for the price!.......2007-06-08

I used this amp to power a pair of Anthony Gallo Micro Ti speakers, used the powered Gallo Sub. This amp is perfect for the hidden installation, and the primary connection is to an iPod doc with sVideo to the HDTV to view the choices on the iPod, and to make playlists with out connecting back up to the PC. The second input to the amp, the one that takes over when powered up and providing a signal is connected to a universal disc player, for stereo playback of cd's, and DVD audio. The AMP is quite small, and fits in the corner shaped cabinet that had a very limited depth issue for the electronics components.

2 out of 5 stars Why the auto-switch???.......2007-06-01

BEWARE: an otherwise nice and simple amp, but the auto-switch feature totally ruins it for me. If there's no sound or only sound at a low volume (eg. silence, whispering or just a quieter dialog in a movie or song) for a few seconds, the amp turns the output off with a loud click only to turn it back on when it senses about half a second of louder sound (which you never get to hear) with another click. It will often turn itself off between songs on a CD.

A totally annoying and unnecessary "feature" which you will run into unless you only listen to music that's constantly loud. I can't stand when things try to be smarter than they are. When I turn on an amp, I want it to stay on until I turn it off. And I want it to amplify everything I send to it, no matter how soft. Without this in my opinion major flaw, I'd give it 5 stars but like this I feel I wasted my money.

5 out of 5 stars Awsome amp.......2007-05-25

Great amp for a great price. Clean, didtortion free sound at all volume levels. i just ordered another one because i was so pleased

Electronics:

  1. BOGEN COMMUNICATIONS C35 35-Watt Paging Mixer / Amplifier
  2. GS100 100 Watt Paging Mixer / Amplifier
  3. BOGEN RM350D AM/FM RECEIVER
  4. DISCONTINUED CROWN Xs4300 POWER AMPLIFIER
  5. Lifestyle SA-2 amplifier
  6. Lifestyle SA-3 amplifier
  7. P.A. AMPLIFIER 60W
  8. Ramsey LPA1C Broadband RF Amplifier Kit
  9. Ramsey SA7 Broadband RF Preamp Kit
  10. NILES AUDIO SI1230 12 Channel Amplifier

Electronics

electronics

Recommended Consumer Electronics:

Cambridge SoundWorks Ensemble 310 Subwoofer/Satellite Speake

jWIN JTP320 Feature Phone (Black)

Okidata OKI B 6300n - printer - B/W - laser ( 62424104 )

High-Capacity Color Cartridge for Jetprinters Z42/Z51/Z52/Z82

15in Crt Resistive Black Touch Screen Microtouch Monitors By 3m

Data Cable for Samsung R200/ R210/ R220 (flash)

Hawking WU120 11Mbps Wireless LAN USB Adapter

Panasonic SVAV30 MPEG4 eWear Digital Camcorder/Still Camera w/ 64 MB SD Card & Docking Station

Tascam DVD6500 - Rack Mountable DVD Player

Fujitsu Siemens LifeBook E351 - PII 300 MHz - RAM : 64 MB - HD : 4.3 GB - CD - Win98 - 13.3" TFT 1024 x 768 ( XGA )

Line 6 Flextone III Plus Guitar Amp