AudioSource AST 220S Satellite Speakers for Plasma & LCD TVs (Pair)
AudioSource AST 220S Satellite Speakers for Plasma & LCD TVs (Pair)
Product Description
Amazon.com Product Description
Now that you've mounted your flat-panel LCD or gas-plasma TV to the wall in true picture-frame fashion, you'll probably need home-theater speakers with a similarly flat, room-friendly design. Enter the AST 220-series loudspeakers, which AudioSource consciously constructed for use in concert with each other. All were designed for wall mounting, and this model, the AST 220S satellite speakers, will also work just fine with standard CRT and projection sets.
Use the AST 220S's as primary left/right speakers with the timbrally matched AST 220C center-channel speaker, and/or as left/right surround speakers in a 5.1-, 6.1-, or 7.1-channel home theater (keeping in mind that you'll need an additional AST 220C to serve as a rear-center speaker for a 6.1 system). For front left/right use, you can either mount the speakers to the wall, as designed, or supplement them with bases for freestanding vertical placement (using the optional AudioSource AST-Base set) or even custom-fit floor stands (the optional AST-Stands).
The AST 220S satellites are sealed (acoustic-suspension) 2-way speakers, each using two 4.25-inch woofers and a single poly-treated silk-dome tweeter. With their 90 to 20,000 Hz frequency response (+/- 2.5 dB), the speakers offer a bit more bass than many satellites, and their performance is easily enhanced through the use of a stand-alone powered subwoofer (such as the AudioSource AST-SUB10) for dedicated ".1" low-frequency surround effects and deep-bass musical tones.
AudioSource recommends using the speakers with an amplifier or surround receiver producing anywhere from 15 to 200 watts per channel (RMS).
What's in the Box
Two satellite speakers, mounting hardware, a user's manual, and warranty information.
Product Description:
Power handling: 20 to 200 watts; 8 ohm impedance Dual 4 1/4" mid bass woofer 1" soft dome tweeter Extruded aluminum chassis Frequency Response: ±2.5dB from 90-20kHz (-6dB @72Hz) 5 1/4" W x 20 1/4" H x 3 1/2" D Includes wall-mounting hardware
AudioSource AST 220S Satellite Speakers for Plasma & LCD TVs (Pair)
Average customer rating: 
|
AudioSource AST 220S Satellite Speakers for Plasma & LCD TVs (Pair)
Manufacturer: Audio Source ProductGroup: CE Binding: Electronics  Surround
| Speakers
| Audio & Video
| Categories
| Electronics
Floorstanding
| Speakers
| Audio & Video
| Categories
| Electronics
Audio & Video
| Refurbished & Used
| Special Features
| Electronics Features
| Electronics
AudioSource
| Brands
| Electronics Features
| Electronics
Similar Items:
Accessories:
Product Features:
ASIN: B00078935I |
Amazon.com Product Description
Now that you've mounted your flat-panel LCD or gas-plasma TV to the wall in true picture-frame fashion, you'll probably need home-theater speakers with a similarly flat, room-friendly design. Enter the AST 220-series loudspeakers, which AudioSource consciously constructed for use in concert with each other. All were designed for wall mounting, and this model, the AST 220S satellite speakers, will also work just fine with standard CRT and projection sets.Use the AST 220S's as primary left/right speakers with the timbrally matched AST 220C center-channel speaker, and/or as left/right surround speakers in a 5.1-, 6.1-, or 7.1-channel home theater (keeping in mind that you'll need an additional AST 220C to serve as a rear-center speaker for a 6.1 system). For front left/right use, you can either mount the speakers to the wall, as designed, or supplement them with bases for freestanding vertical placement (using the optional AudioSource AST-Base set) or even custom-fit floor stands (the optional AST-Stands).
The AST 220S satellites are sealed (acoustic-suspension) 2-way speakers, each using two 4.25-inch woofers and a single poly-treated silk-dome tweeter. With their 90 to 20,000 Hz frequency response (+/- 2.5 dB), the speakers offer a bit more bass than many satellites, and their performance is easily enhanced through the use of a stand-alone powered subwoofer (such as the AudioSource AST-SUB10) for dedicated ".1" low-frequency surround effects and deep-bass musical tones.
AudioSource recommends using the speakers with an amplifier or surround receiver producing anywhere from 15 to 200 watts per channel (RMS).
What's in the Box
Two satellite speakers, mounting hardware, a user's manual, and warranty information.
Product Description
AudioSource designs, manufactures, and sells a full line of home theater products including audio components, in-wall and in-ceiling speakers, and complete home theater surround sound speaker systems.AudioSource continues to maintain its commitment to provide the products that people need to complete their home theater systems. AudioSource constantly monitors the market and the latest trends, so that it can deliver the latest technology to the home theater enthusiast at a reasonable price in an easy-to-use format.PRODUCT FEATURES:Extruded Aluminum housing with metal grills;Ideal for Plasma and LCD monitors;Includes wall mounting brackets and hardware.Electronics:
Recommended Consumer Electronics:
Samsung A530 Phone (Verizon Wireless)
HP Compaq Business Desktop dc7600 - P4 640 3.2 GHz ( AF877AA#ABA )
LEXMARK W812 LASER PRINTER ( 14K0100 )
Targus PADVD010U USB 2.0 DVD/CD-ROM Slim External Drive - Black
NEW Car Power Adapter for Gateway M405X Laptop Notebook Comp
Panasonic RR-US380 Compact IC Digital Voice Recorder
Memorex MVD2029 Ultra Thin DVD Player
INTEC DUS0053I Playstation® 2 Max Memory¿
TechPower Premium Battery Charger for Sony DCR-HC20 Camcorder