Klipsch RF-35 Floorstanding Speaker
Klipsch RF-35 Floorstanding Speaker
Product Description
Amazon.com Product Description
A refined version of the original RF-3, the number-one selling floorstanding loudspeaker in the United States since its introduction in 1999, the Klipsch RF-35 floorstanding speaker is designed to provide the highest level of two-channel and multi-channel audio as well as home theater surround sound (with the matching RC-35 center channel, RW-12 powered subwoofer and RS-35 rear channel speakers). Requiring less than a quarter the amplifier power of conventional speakers, the RF-35 conveys the full impact of whatever signal it is fed, without strain or limitation. This speaker measures 40.9 x 9.25 x 14.8 (with grille) inches (HxWxD).
The RF-35 uses a 1-inch titanium dome compression driver tweeter for the high frequencies, loaded by a 6-inch square 90 x 60-degree Tractrix Horn molded into the front of the enclosure. The horn raises the driver's efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor, and ceiling. Dual 6-inch Cerametallic cone woofers with rigid, low-resonance castpolymer frames generate powerful, dynamic bass. All drivers are magnetically shielded to prevent interference with direct-view television sets. The RF-35 also has a flared rear port to minimize turbulence noise.
The RF-35's crossover network ensures life-like performance with its top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor all mounted on a high-quality fiberglass epoxy circuit board. These premium components ensure lifelike performances. The speaker features two pairs of binding posts, which are linked with jumpers for normal wiring. Removing the jumpers allows the speaker to be bi-wired. The speaker's floating grille minimizes diffraction, and its feet can be fitted with rubber pads or spikes.
Product Description:
Klipsch RF-35 Floorstanding Loudspeaker - With the RF-35 from Klipsch, you're taking a step into a more sophisticated world of audio. This loudspeaker is perfect for placement in a 2-channel stereo environment, or as a front speaker in a surround sound setting. Delivering 150 Watts of continuous power through hi-quality components, for an amazing sound. Two 8 Cerametallic (specially treated aluminum that has been anodized into ceramic) Woofer Cones Crossover Network connected with Monster Cable Balanced Bandwidth wiring Flared Rear Port - minimizes turbulence noise MDF enclosure with Black wood veneer for a stunning appearance Includes a curved, cloth-covered, stand-off grille Frequency Response - 37Hz - 20kHz +/- 3dB Dimensions - 40.9 (h) x 9.25 (w) x 14.8 (d) Weight - 54lbs.
Average customer rating: 
|
KLIPSCH RF-35 Floorstanding Loudspeaker
Manufacturer: KLIPSCH ProductGroup: CE Binding: Electronics  Speakers
| Audio & Video
| Categories
| Electronics
| Bookshelf
| Ceiling Speakers
| Center Channel
| Floorstanding
| Home Theater Speaker Systems
| In-Wall & In-Ceiling
| Outdoor
| Portable Audio Speakers
| Subwoofers
| Surround
| Wireless
Product Features:
ASIN: B000782SJQ |
Product Description
Klipsch RF-35 Floorstanding Loudspeaker - With the RF-35 from Klipsch, you're taking a step into a more sophisticated world of audio. This loudspeaker is perfect for placement in a 2-channel stereo environment, or as a front speaker in a surround sound setting. Delivering 150 Watts of continuous power through hi-quality components, for an amazing sound. Two 8 Cerametallic (specially treated aluminum that has been anodized into ceramic) Woofer Cones Crossover Network connected with Monster Cable Balanced Bandwidth wiring Flared Rear Port - minimizes turbulence noise MDF enclosure with Black wood veneer for a stunning appearance Includes a curved, cloth-covered, stand-off grille Frequency Response - 37Hz - 20kHz +/- 3dB Dimensions - 40.9 (h) x 9.25 (w) x 14.8 (d) Weight - 54lbs.Amazon.com Product Description
A refined version of the original RF-3, the number-one selling floorstanding loudspeaker in the United States since its introduction in 1999, the Klipsch RF-35 floorstanding speaker is designed to provide the highest level of two-channel and multi-channel audio as well as home theater surround sound (with the matching RC-35 center channel, RW-12 powered subwoofer and RS-35 rear channel speakers). Requiring less than a quarter the amplifier power of conventional speakers, the RF-35 conveys the full impact of whatever signal it is fed, without strain or limitation. This speaker measures 40.9 x 9.25 x 14.8 (with grille) inches (HxWxD).The RF-35 uses a 1-inch titanium dome compression driver tweeter for the high frequencies, loaded by a 6-inch square 90 x 60-degree Tractrix Horn molded into the front of the enclosure. The horn raises the driver's efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor, and ceiling. Dual 6-inch Cerametallic cone woofers with rigid, low-resonance castpolymer frames generate powerful, dynamic bass. All drivers are magnetically shielded to prevent interference with direct-view television sets. The RF-35 also has a flared rear port to minimize turbulence noise.
The RF-35's crossover network ensures life-like performance with its top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor all mounted on a high-quality fiberglass epoxy circuit board. These premium components ensure lifelike performances. The speaker features two pairs of binding posts, which are linked with jumpers for normal wiring. Removing the jumpers allows the speaker to be bi-wired. The speaker's floating grille minimizes diffraction, and its feet can be fitted with rubber pads or spikes.
Electronics:
Recommended Consumer Electronics:
HP MX705 17'' CRT Monitor ( P8722A#ABA )
Western Digital FireWire/USB 2.0 Combo Special Edition - Har
Hewlett Packard 2200DT LaserJet Printer
IBM MULTI-BURNER PLUS ( 73P3305 )
HP DeskJet 350CBI Color Portable Printer
Panasonic SLSX270 Portable CD Player